Skip to content
Overview

Overview

This documentation collects everything known about the segment LCD on the pump block of the Thermaltake LB360-S ARGB Sync (model numbers CL-W499-PL12SW-A, Snow Edition CL-W500-PL12SW-A) and how it is driven over USB. The goal is a description precise enough to develop a library for driving the display without further research.

SegLcd is an independent project and not affiliated with Thermaltake. “Thermaltake” is a trademark of Thermaltake Technology Co., Ltd.; the name is used only to identify the supported hardware.

Summary

PropertyValue
USB ID5131:200e (vendor ID 0x5131 is registered in usb.ids as “MSR”, not Thermaltake’s 264a)
Device classHID, vendor usage page 0xFF00, 64-byte input and output reports, no report IDs
Linux driverusbhid / hid-generic, access via /dev/hidrawN
ControlHost sends a 64-byte update packet (00 01 02 …) with readings every 250 ms
Turning offPacket 00 0F 00 … – or simply stop sending (the display turns off after a timeout)
ARGB lightingnot via USB, but via the motherboard’s 5 V ARGB header
Official software“TT SEGMENT LCD Software” (Windows only; according to Thermaltake supports CL-W499/CL-W500)
Verification status (2026-11-20): The protocol comes from the project ThermalTakeWaKue for the LA series (5131:2007). On the LB360-S (5131:200e) the update packet is now confirmed on real hardware: the display shows the CPU and GPU temperature as an integer in °C. Decimals, the °F flag and CPU usage have no visible effect. Details: Verification & open questions.

Contents

Repository layout

      • hugo.yaml
                          • 70-seglcd.rules
                          • 72-rapl-energy-read.rules
                          • install-user.sh
                          • config.example.toml
                              • lb360s-usb-hostdev.xml
                              • capture-usbmon.sh
                              • extract-packets.sh
                              • seglcd.pot
                              • de.po
                              • extract.sh
                              • SegLcd.slnx