Settings app seglcd-gtk
Settings app seglcd-gtk
seglcd-gtk is a GTK 4 / libadwaita app for seglcdd: it shows the display state and the current
values and sets the intervals and the sensor of each value. It talks to the service only over D-Bus.
| Page | Contents |
|---|---|
| Status | device, Feed display (Enabled), all values (the LB360-S shows CPU and GPU temperature), intervals, service and configuration file |
| Sensors | per value: Automatic or a sensor of the matching kind (from ListSensors, with current value), below it the sensor in use; how the CPU clock is derived |
Every change applies and is saved at once (SaveConfig; system service: /var/lib/seglcd/config.toml). The menu
reloads the configuration file, e.g. after editing it by hand.
Installation
- Packages:
seglcd-gtk(AUR, RPM subpackage, DEB) – needs GTK 4 and libadwaita ≥ 1.6. - Per user:
packaging/install-user.shinstalls it with the user service (--no-guiskips it).
Connection
The app uses the system service if it runs (or can be started via D-Bus), otherwise the user service, and reconnects
when the service restarts. --system or --session restricts it to one bus.
Changing the system service is allowed for the active local user; otherwise (e.g. over SSH) polkit asks for administrator authentication.