Hardware & USB descriptors
Product
| Product | Thermaltake LB360-S ARGB Sync AIO Liquid Cooler |
| Model numbers | CL-W499-PL12SW-A (black), CL-W500-PL12SW-A (Snow Edition) |
| Display | round segment LCD (fixed digit/symbol segments, not a pixel display) for CPU/GPU temperature |
| Display connection | USB Type-C on the pump block → internal USB 2.0 header (9-pin) of the motherboard |
| Lighting | ARGB via the motherboard’s 5 V header (3-pin), independent of the USB cable |
| Official software | TT SEGMENT LCD Software (Windows 10/11), current version V1.0.6 from 2026-06-08 according to the download page |
USB identification
Determined on the reference system (AMD Ryzen 7 5800X3D, motherboard with ITE IT8686E/IT8792E,
Linux 7.3, CachyOS) with lsusb -v -d 5131:200e:
Bus 001 Device 003: ID 5131:200e MSR
Negotiated speed: Full Speed (12Mbps)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x5131 MSR
idProduct 0x200e
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0029
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 70mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 5
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 34
Endpoint Descriptor:
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1Key points for an implementation:
- No manufacturer, product or serial number strings (
iManufacturer = iProduct = iSerial = 0). HID APIs return errors or empty strings for them – this is normal. Use VID/PID only for detection. According to ThermalTakeWaKue, the LA series (5131:2007) reports the product stringFBB. - String indices 4 (configuration) and 5 (interface) exist; their contents have not been read yet
(requires root:
sudo lsusb -v -d 5131:200e). - No serial number ⇒ multiple identical devices can only be distinguished by their physical path
(
HID_PHYS, USB port). - Full-speed device, one interrupt IN (0x81) and one interrupt OUT (0x01) endpoint of 64 bytes each, polling interval 1 ms.
bcdDevice = 0.00– no firmware version can be read from it.
Vendor ID 0x5131
0x5131 is listed in the USB ID database as “MSR” (the only known product there:
5131:2007 “MSR-101U Mini HID magnetic card reader”). In practice, Thermaltake apparently uses this
ID for the microcontroller of its segment LCDs – 5131:2007 is the LA series display.
A library should therefore not rely on the vendor name and should only address
explicitly known VID/PID pairs, so as not to write to unrelated devices (e.g. card readers).
| VID:PID | Device | Protocol |
|---|---|---|
5131:200e | Thermaltake LB360-S ARGB Sync (CL-W499/CL-W500) | update packet verified (2026-11-20) |
5131:2007 | Thermaltake LA series water block | verified (ThermalTakeWaKue) |
HID report descriptor
34 bytes, read from /sys/bus/usb/devices/1-10:1.0/0003:5131:200E.0006/report_descriptor
(readable without root):
06 00 ff 09 01 a1 01 09 02 15 00 26 00 ff 75 08 95 40 81 06
09 02 15 00 26 00 ff 75 08 95 40 91 06 c0Decoded:
| Bytes | Item | Meaning |
|---|---|---|
06 00 ff | Usage Page | Vendor Defined 0xFF00 |
09 01 | Usage | 0x01 |
a1 01 | Collection | Application |
09 02 | Usage | 0x02 |
15 00 | Logical Minimum | 0 |
26 00 ff | Logical Maximum | 0xFF00 (see note) |
75 08 | Report Size | 8 bits |
95 40 | Report Count | 64 |
81 06 | Input | Data, Variable, Relative → 64 bytes |
09 02 | Usage | 0x02 |
15 00 | Logical Minimum | 0 |
26 00 ff | Logical Maximum | 0xFF00 |
75 08 | Report Size | 8 bits |
95 40 | Report Count | 64 |
91 06 | Output | Data, Variable, Relative → 64 bytes |
c0 | End Collection |
Conclusions:
- There is no
Report IDitem ⇒ the device uses unnumbered reports. On the wire, reports are exactly 64 bytes long; HID APIs nevertheless expect a leading report ID byte0x00when writing (i.e. 65 bytes), see Transport. - There are no feature reports –
HIDIOCSFEATURE/HidD_SetFeaturecannot be used. - Logical Maximum is encoded as
26 00 ff, i.e. little-endian0xFF00(signed −256). 255 (26 ff 00) was surely intended. This is a harmless firmware bug; Linux and Windows ignore it for vendor reports. A library must not validate the descriptor strictly. - The descriptor is byte-identical to that of the LA series (
5131:2007).
Representation on Linux
/dev/hidraw5
HID_ID=0003:00005131:0000200E
HID_NAME=HID 5131:200e
HID_PHYS=usb-0000:02:00.0-10/input0
DRIVER=hid-generic
Symlink: /dev/input/by-id/usb-5131_200e-hidrawNo input device (keyboard/mouse or similar) is created, only the hidraw node.
The number N in /dev/hidrawN is not stable – instead, search by VID/PID via sysfs/udev
or use the symlink /dev/input/by-id/usb-5131_200e-hidraw.