Skip to content
Test tool seglcd

Test tool seglcd

seglcd sends to and analyses the display. Full option reference: seglcd <command> --help and seglcd(1). Requirements: hidapi and the udev rule; installed by the packages or packaging/install-user.sh. From the source tree: dotnet run --project src/SegLcd.Tool -- <command>.

Pause a running seglcdd before sending commands, otherwise both send alternately.
CommandPurpose
list [--all]known displays (or all HID devices): IDs, descriptor, whether the device can be opened
sendsend fixed values: --cpu-temp, --gpu-temp, --fan, --pump, --ram, … (missing = 0)
livesend live sensor values; sources as in Sensors & configuration, --show prints them
probeset one byte at a time to find out what the display shows
sweep <offset>count one byte up (--from, --to, --step, --step-ms)
raw <hex…>send up to 64 bytes (without report ID), periodically or --once
offsend the off packet
holdsend for --send s, then stop but keep the device open for --hold s (timeout test)
listenprint input reports (the LB360-S sends none)
sensorslist all sensor sources with spec and current value
decode [file]decode hex packets, e.g. from tools/extract-packets.sh; --diff shows changes only

Sending commands repeat their packet every --interval ms (250; warning above 400) until --duration ends or Ctrl+C. Common options: --device /dev/hidrawN, --dry-run (print the packet only), --verbose. Exit codes: 0 success, 1 nothing found / invalid input, 2 device missing or not accessible.

--fahrenheit is not suitable for the LB360-S: values ≥ 100 appear with two digits (122 → “22”).

Examples

seglcd list
seglcd send --cpu-temp 42 --gpu-temp 57 --duration 20
seglcd send --cpu-temp 42.5 --fan 1234 --dry-run | seglcd decode
seglcd live --show --fan-sensor it8686_31050607:fan1 --pump-sensor it8686_31050607:fan5
seglcd raw 00 01 02 2a --duration 5

probe

Writes --value (88) – or, with --values 0,1,50,99,128,255, a sequence of --value-seconds (1) each – into one byte while all others stay 0. --offsets 3,13,36-63 limits the bytes (default 3–63), --auto <s> advances automatically. Interactive keys: Enter next byte, b back, a number changes the value, o<offset> jumps, q quits.

seglcd probe --values 0,1,50,99,128,255 --auto 0 --offsets 3-63